Adhesive and sealant for crack gauges.
For bonding and installing crack gauges on virtually all surfaces (including smooth, porous and non-porous surfaces).
Not suitable for polyethylene (PE) and polypropylene (PP), PTFE, bitumen or in permanently damp areas.
Permanently elastic, universally applicable, solvent-free, filling. Strong mounting adhesive with immediate grip and high initial adhesion; suitable for use on dry surfaces, both indoors and outdoors. 165 g squeeze tube sufficient to fix approximately 15 crack gauges. Temporarily secure the crack with adhesive tape.
Drying times*
- Skin formation time: approx. 10–15 minutes
- Hand-tightening time: approx. 24 hours
- Curing rate: approx. 2 mm/24 hours
- Can be walked on after approx. 4 hours
- For indoor and outdoor use
- Good filling capacity
- Resistant to temperatures between -40 °C and +100 °C
- UV-, water- and weather-resistant
- Solvent-free
* Drying times may vary depending on factors such as the substrate, the amount of product applied, moisture content and ambient temperature.
Fitting crack gauges
- Determine where the crack gauge is to be positioned.
- Apply sealant to the crack meter.
- Place the crack filler on the wall and spread the sealant using a light circular motion.
- If the crack filler does not stay in place, secure it temporarily with adhesive tape.