For indoor and outdoor use on walls and in corners; readings taken directly from the crack gauge.
For measuring cracks in structures in the x-direction with a width of -10 to 40 mm; maximum displacement of 40 mm from the zero point. In the y-direction, 20 mm up or down from the zero point. It is also possible to determine the angular displacement. Reading accuracy to 0.1 mm.
Mounting via adhesive (H410/H415), double-sided adhesive tape and/or screws. The crack gauge can be used in both a clockwise and anti-clockwise direction, as well as at angles.
Dimensions of the plate (L x W x D): 100 x 80 x 0.8 mm, measuring range in the y-direction: -25 to +25 mm.
Dimensions of the ruler (L x W x D): 100 x 20 x 0.5 mm, measuring range in the x-direction: -10 to +40 mm, +49 mm if the ruler is fixed to the left of the plate.
- Material: polypropylene; must be fixed using superglue only
- Lightweight and does not absorb moisture.
- High chemical resistance.
- Odourless and tasteless.
- Environmentally friendly.
- Impact-resistant, tough and robust.
- Moderately sensitive to UV radiation, light, oxygen and ozone
- Density: 0.84–0.91 g/l
- Melting point: 120–176 °C