Universal, high-quality mounting adhesive and sealant.
For bonding and fixing crack gauges to virtually all dry surfaces (including smooth, porous and non-porous surfaces). Not suitable for polyethylene (PE) and polypropylene (PP) or for use in permanently damp areas. Permanently elastic, universally applicable, solvent-free, filling. Strong mounting adhesive with immediate grip and high initial adhesion; suitable for use on dry surfaces indoors and outdoors. A 250 g tube is sufficient to secure approximately 25 to 30 metres of crack.
- Curing time: at least 5 minutes; temporarily secure the crack repair tape with adhesive tape.
- If the surface is too wet, heat/dry it with a gas torch.
- Drying times*
- Skin formation time: approx. 10–15 minutes
- Hand-firm time: approx. 24 hours
- Curing rate: approx. 2 mm/24 hours
- Final strength: maximum final strength is reached after approx. 48 hours
* Drying times may vary depending on factors such as the substrate, the amount of product applied, moisture content and ambient temperature.
Use with crack meters
- Determine where the crack gauge is to be positioned.
- Apply sealant to the crack gauge.
- Place the crack indicator on the wall and spread the sealant using a gentle circular motion.
- If the crack gauge does not stay in place, secure it temporarily with adhesive tape.